One to One

by Estel Group Srl

Armchairs with reclining seat, for auditoriums and conference rooms

One to One was designed as a chair for public seating, manufactured on an industrial scale, but endowed with a high degree of customisation, which is expressed in the wide range of configurations and finishes, in the just-in-time availability of spares, in the speedy delivery timing and in the ease of fitting out. Seat width and back rest height can be custom built: One to One, to fully satisfy every single client.
The wide range of finishes and accessories guarantees solutions and configurations suitable to every typology of public spaces. The back rests, whose set up is variable over three positions, adapt to the hall's viewing lines and to the seating arrangements.
From the choice of fabrics to the manufacturing accuracy, through to the technical solutions, One to One shows the elegance of tradition and the gift of modernity.

Side Leg
High resistance 3mm thick stamped and rolled steel sheet. Finish is in gun metal colour epoxy powder coat.

Seat
Main structure in 12 mm cross laminated beechwood with steel pivots for seat rotation and installation. Finishes can be: in clear varnished beechwood veneer, all upholstered or with plastic laminated. Seat to be pad in 7 mm cross laminated beechwood with glued padding in F/R polyurethane foam, density 40 Kg/m³.

Backrest
Main structure in 12 mm cross laminated beechwood. Finishes can be: in clear varnished beechwood veneer, all upholstered or with plastic laminated. Backrest to be pad in 7 mm cross laminated beechwood with glued padding in F/R Polyurethane foam, density 35 Kg/m³. To be mount in 3 selectable backrest angles: 11°, 16° e 21° depending on users' viewing angle.

Base
The floor mounting foot is a stamped steel plate 3 mm thick. Finish is in gun metal colour epoxy powder coat.

Armrests
In polypropylene gun metal colour with upper arm in same colour and material, or in clear varnished beechwood, or upholstered in F/R fabric, very easy replaceable. Is available the version all in clear varnished beechwood on request

Mechanisms and adjustments
The seat tip-up mechanism is a counterweight type.

Measures
The distance between axes for armchairs with polypropylene armrests is 520 mm and for armchairs with wooden armrests is 550 mm. The total height for all upholstered armchairs is 900 mm, and for armchairs with clear varnished beechwood and plastic laminated backrests is 940 mm.

Table
Foot The mounting foot is a stamped steel plate, with welded reinforcement. Finish is in gun metal color epoxy powder coat.
Leg is a rectangular steel column with finish in gun metal colour epoxy powder coat.
The tip-up top mechanism is an antipanic type, made of a stamped steel plate in aluminium colour, epoxy powder coated.
The top is in postformed plastic laminated, light grey colour.
The top is in engineered fiberboard covered in beech wood colour PVC.

Accessori a richiesta
The right and left hand antipanic writing tablets are made of 8 mm thick scratch resistant black phenolic with aluminium support, and retract into the side support. 2 dimensions are available: standard one 270 x 300 mm and the big one for laptop 250 x 335 mm.
It is available the Armrest version all in clear varnished beechwood.
The side supports' boxes are made in clear varnished beechwood or all upholstered, short and long types are available.
Special distance between axes up from 520 mm to 600 mm maximum.
Special height up to 1100 mm.
Installation hardware
Wiring and Box with A/C and RJ45 inlets
Aisle light.
Seat number.
Row letter.
Conical cup holder with internal Ø minimum 70 mm and maximum 80 mm.
Floor mounted feet for sloped floors.
Arrangement for curved rows.